How To Drain Lg Washer Top Load. Press power to turn the washer on. Watch the filling of the basin.
If done correctly, 1 minute of estimated time will display on the clock, the unit will drain. If your washing machine has one, it will be behind a small flap in the back wall of the washer. Next, locate and open the service panel to unclip the drain hose.
Table of Contents
These Filters Should Never Require Cleaning Or Replacement.
To check the drain pump: Another way you can drain the water is by turning off your washing machine and unplugging it from the outlet. No top loader and maybe 5 years old.
Disconnect The Washer From The Power Source.
The unit should begin a spin only cycle and attempt to drain any remaining water that is inside the washer. Turn off your washing machine’s water and power supply to avoid water leakage and electrocution. If it is necessary to drain the water from the washer, power the machine on and press the spin speed key until no spin is selected then press start.
Use A Tie Strap To Secure The Drain Hose In Place.
Switch off the power at the wall, or unplug the washer. Unplug the washing machine from the power source. If done correctly, 1 minute of estimated time will display on the clock, the unit will drain.
There May Be A Lot Of Water In The Tank Of The Lg Washing Machine.
Press the start/pause button to begin the cycle. Switch the power button on the machine off, if your model has one. I made sure the pump is actually drawing and the hose is not clogged
Check Your Washer’s Manual For Drain Pump Access Instructions.
What have you tried so far with your lg washer? Insert the end of the drain hose into the standpipe. Locate the gray drain hose connecting the washer to the drain pipe in the wall.